Step-by-Step: Setting Up Your Avomi Kit
The most common issues we see—burnt hits, leaks, or "dead" devices—often stem from incorrect setup. Follow this simple protocol every time you unbox a new Avomi device or pod.
1. Unbox and Inspect
Remove the device or pod from the packaging. Ensure you keep the packaging handy until you are sure the device is working correctly.
2. The "Seal and Sticker" Rule
Every new Avomi pod comes with protective seals to keep the liquid fresh and prevent leaks during transit.
- Peel the Sticker: Remove the protective sticker from the base of the pod. If you do not remove this sticker, the electrical contacts cannot connect, and the device will not fire.
- Remove the Silicone Bung: Take out the small rubber stopper from the mouthpiece.
3. Connect the Refill Container (CLIQ & CLIQ Mini)
If you are using the Avomi CLIQ (12ml) or CLIQ Mini (6ml), your pod system includes a separate "refill container" that clips into the device.
- Insert the Container: Slide the 10ml (or 4ml) refill container into the device body until it clicks firmly into place. This action connects the main reservoir to the 2ml pod chamber.
- For the Avomi FLIQ: You simply insert the four individual 2ml pods into the rotating barrel.
4. The 60-Second Prime
This is the secret to perfect flavour. Once you have inserted a fresh pod or connected a refill container, wait 60 seconds before vaping.
Why? Even though the 2ml pod chamber may contain liquid, connecting the refill container or removing the freshness seals breaks the vacuum inside the device. This pressure change can sometimes trap a small air bubble against the coil (an "airlock"). Waiting 60 seconds allows the pressure to equalise and ensures the coil is perfectly saturated for your first puff.
How to Use a Prefilled Pod Vape: Best Practices
Once your kit is set up, operation is simple. All Avomi devices are draw-activated, meaning there are no buttons to press. Simply inhale on the mouthpiece to produce vapour.
However, a couple of techniques will ensure a smoother experience:
- Don’t Block the Airflow: Be mindful of where your fingers rest on the device. Covering the small air inlet holes on the side or base will make the draw feel tight and can cause the pod to overheat.
- Gentle Puffs: You don't need to drag heavily. A smooth, steady inhale works best for the mesh coils used in Avomi pods.
Essential Maintenance: Keep It Running
Unlike the disposables of old, your Avomi kit is a keeper. A miniscule amount of maintenance can ensure it performs just as well on day 100 as it did on day 1.
- Charging: Use a standard USB-C cable (not included) and plug it into a low-output power source, such as a TV USB port, game console, or a 5V/1A wall adapter. Avoid using high-powered "fast chargers" (like 20W+ phone or laptop bricks), as the high current can degrade the internal battery over time. For more detailed advice on preserving your device's lifespan, read our full guide on how to maintain your Avomi battery and pods.
- Cleaning the Contacts: If your device stops firing or the pod isn't recognised, check the metal contact points inside the device. Dust or condensation can block the connection. A quick wipe with a dry tissue usually fixes this instantly.
Troubleshooting Common Issues
Is your pod vape not working as expected? Here are the two most common quick fixes:
- Burnt Taste: This usually means the pod is empty, or you didn't wait 60 seconds before the first puff. If the pod is empty, replace it. If it’s new and burnt, the wick is damaged and the pod needs replacing.
- Gurgling/Spitting: This can happen if you inhale too hard. Remove the pod, wrap it in a tissue, and give it a gentle flick to clear excess liquid from the chimney.
If you are experiencing other issues, check our comprehensive guide to troubleshooting your Avomi pod kit.
Safety and Regulations
Users often ask two key questions: Are prefilled pod vapes safe? and Are these big puff devices legal?
Avomi devices are "closed systems." This means the e-liquid is sealed in a tamper-proof environment, tested to strict UK safety standards (TRPR). Unlike open systems where liquids can be mixed or contaminated, prefilled pods offer a consistent, regulated experience. Furthermore, unlike the banned single-use disposables, our high-capacity systems are fully compliant with UK law thanks to their modular, refillable design.
You can learn more about our ingredients in our deep dive on the truth about pod vape safety, or read up on compliance in our guide to UK vaping laws for 2026.
Responsible Disposal
When your pod is finally empty (flavour loss or a slightly burnt taste), please do not throw it in the general waste.
- The Battery: Never bin the device itself. When the battery eventually reaches the end of its life cycle, take the entire unit to a dedicated WEEE vape recycling bin, found in most supermarkets and recycling centres.
- The Pods: Check if your local recycling centre accepts plastics with metal components.
For details on where to find these bins and how to handle old devices, see the Avomi guide to responsible recycling.
